厌氧氨氧化电子受体的研究

在无机条件下,以该课题组已经培养出来的厌氧氨氧化污泥作为接种污泥,分别以硫酸盐、硝酸盐和亚硝酸盐为电子受体来研究氨的氧化反应。从去除速率的角度来看,以NO2--N、NO3--N和SO42--S为电子受体的反应器,分别在运行的第24.5天、40天和31天时达到0.030 0 kg/(m.3d)NH4+-N去除速率,则氧化氨的能力由大到小依次是:亚硝酸盐>硫酸盐>硝酸盐;从标准吉布斯自由能变化来看,3种反应都是可以发生的;以亚硝酸盐为电子受体的反应过程是一个消耗酸度的生物过程,而以硫酸盐为电子受体的反应过程是一个消耗碱度的生物过程。     

NaClO氧化水中As(Ⅲ)的实验研究

利用氧化剂将水中的As(Ⅲ)氧化成As(Ⅴ),既可提高去除效果,又可降低毒性。文章以NaClO作为氧化剂进行了氧化As(Ⅲ)的相关实验,实验结果表明:pH在4~11的范围内对NaClO氧化As(Ⅲ)的影响不大,As(Ⅲ)的氧化率随着NaClO的投加量和氧化反应时间的增加而增大,其氧化过程更符合一级动力学过程。结论:NaClO氧化As(Ⅲ)迅速,氧化率基本可达到100%,氧化效果明显。     

Oxidative removal of acetaminophen using zero valent aluminum-acid system: Efficacy, influencing factors, and reaction mechanism

Commercial available zero valent aluminum under air-equilibrated acidic conditions (ZVAl/H⁺/air system) demonstrated an excellent capacity to remove aqueous organic compounds. Acetaminophen (ACTM), the active ingredient of the over-the-counter drug Tylenol^®, is widely present in the aquatic environment and therefore the treatment of ACTM-contaminated water calls for further research. Herein we investigated the oxidative removal of ACTM by ZVAl/H⁺/air system and the reaction mechanism. In acidic solutions (pH < 3.5), ZVAl displayed an excellent capacity to remove ACTM. More than 99% of ACTM was eliminated within 16 hr in pH 1.5 reaction solutions initially containing 2.0 g/L aluminum and 2.0 mg/L ACTM at 25 ± 1\textcelsius. Higher temperature and lower pH facilitated ACTM removal. The addition of different iron species Fe⁰, Fe²⁺ and Fe³⁺ into ZVAl/H⁺/air system dramatically accelerated the reaction likely due to the enhancing transformation of H₂O₂ to HO. via Fenton's reaction. Furthermore, the primary intermediate hydroquinone and the anions formate, acetate and nitrate, were identified and a possible reaction scheme was proposed. This work suggested that ZVAl/H⁺/air system may be potentially employed to treat ACTM-contaminated water.     

Photodegradation of amoxicillin by catalyzed Fe3+/H2O2 process

Three oxidation processes of UV-Fe³⁺(EDTA)/H₂O₂ (UV: ultraviolet light; EDTA: ethylenediaminetetraacetic acid), UV-Fe³⁺/H₂O₂ and Fe³⁺/H₂O₂ were simultaneously investigated for the degradation of amoxicillin at pH 7.0. The results indicated that, 100% amoxicillin degradation and 81.9% chemical oxygen demand (COD_Cr) removal could be achieved in the UV-Fe³⁺ (EDTA)/H₂O₂ process. The treatment efficiency of amoxicillin and COD_Cr removal were found to decrease to 59.0% and 43.0% in the UV-Fe³⁺/H₂O₂ process; 39.6% and 31.3% in the Fe³⁺/H₂O₂ process. Moreover, the results of biodegradability (biological oxygen demand (BOD₅)/COD_Cr ratio) revealed that the UV-Fe³⁺ (EDTA)/H₂O₂ process was a promising strategy to degrade amoxicillin as the biodegradability of the effluent was improved to 0.45, compared with the cases of UV-Fe³⁺/H₂O₂ (0.25) and Fe³⁺/H₂O₂ (0.10) processes. Therefore, it could be deduced that EDTA and UV light performed synergetic catalytic effect on the Fe³⁺/H₂O₂ process, enhancing the treatment efficiency. The degradation mechanisms were also investigated via UV-Vis spectra, and high performance liquid chromatography-mass spectra. The degradation pathway of amoxicillin was further proposed.     

Particle number size distribution and new particle formation: New characteristics during the special pollution control period in Beijing

New particle formation is a key process in shaping the size distribution of aerosols in the atmosphere.We present here the measurement results of number and size distribution of aerosol particles (10-1...     

Degradation kinetics and mechanism of aniline by heat-assisted persulfate oxidation

Oxidation of aniline by persulfate in aqueous solutions was investigated and the reaction kinetic rates under different temperature, persulfate concentration and pH conditions were examined in batch experiments. The results showed that, the aniline degradation followed pseudo first-order reaction model. Aniline degradation rate increased with increasing temperature or persulfate concentration. In the pH range of 3 to 11, a low aniline degradation rate was obtained at strong acid system (pH 3), while a high degradation rate was achieved at strong alkalinity (pH 11). Maximum aniline degradation occurred at pH 7 when the solution was in a weak level of acid and alkalinity (pH 5, 7 and 9). Produced intermediates during the oxidation process were identified using liquid chromatography-mass spectrometry technology. And nitrobenzene, 4-4’-diaminodiphenyl and 1-hydroxy-1,2-diphenylhydrazine have been identified as the major intermediates of aniline oxidation by persulfate and the degradation mechanism of aniline was also tentatively proposed.     

Diversity of methanotrophs in a simulated modified biocover reactor

A simulated landfill biocover microcosm consisting of a modifying ceramsite material and compost were investigated. Results show that the mixture can improve the material porosity and achieve a stable and highly efficient (100%) methane oxidation over an extended operating period. The diversity of the methanotrophic community in the microcosm was assessed. Type I methanotrophs were enhanced in the microcosm due to the increased air diffusion and distribution, whereas the microbial diversity and population density of type II methanotrophs were not significantly affected. Moreover, the type I methanotrophic community structure significantly varied with the reactor height, whereas that of type II methanotrophic communities did not exhibit a spatial variation. Phylogenetic analysis showed that type I methanotroph-based nested polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) resulted in the detection of eight different populations, most of which are related to Methylobacter sp., whereas that of type II resulted in the detection of nine different populations, most of which are related to Methylocystaceae. Methanotrophic community analysis also indicated that a number of new methanotrophic genera not closely related to any known methanotrophic populations were present.     

Ammonium-dependent regulation of aerobic methane-consuming bacteria in landfill cover soil by leachate irrigation

The impacts of landfill leachate irrigation on methane oxidation activities and methane-consuming bacteria populations were studied by incubation of landfill cover soils with leachate and (NH₄)₂SO₄ solution at different ammonium concentrations. The community structures and abundances of methane-oxidizing bacteria (MOB) and ammonia-oxidizing bacteria (AOB) were examined by PCRDGGE and real-time PCR. Compared with the pure (NH₄)₂SO₄ solution, leachate addition was found to have a positive effect on methane oxidation activity. In terms of the irrigation amount, ammonium in leachate was responsible for the actual inhibition of leachate. The extent of inhibitory effect mainly depended on its ammonium concentration. The suppression of the predominant methaneconsuming bacteria, type I MOB, was responsible for the decreased methane oxidation activity by ammonium inhibition. Methaneconsuming bacteria responded diversely in abundance to ammonium. The abundance of type I MOB decreased by fivefold; type II MOB showed stimulation response of fivefold magnification upon the first addition but lessened to be lower than the original level after the second addition; the amount of AOB was stimulated to increase for 20-30 times gradually. Accumulated nitrate from nitrification strengthened the ammonium inhibition on type I and type II MOB, as a result, repetitive irrigation was unfavorable for methane oxidation.     

Glucose production from hydrolysis of cellulose over a novel silica catalyst under hydrothermal conditions

A novel silica catalyst was synthesized by evaporation-induced self-assembly (EISA) method and tested for the catalytic selective hydrolysis of cellulose to glucose. This silica catalyst exhibited a higher catalytic activity than other oxides prepared by the same method, such as ZrO₂, TiO₂, and Al₂O₃. Using silica as a catalyst, cellulose was selectively hydrolyzed into glucose with a glucose yield as high as 50% under hydrothermal conditions without hydrogen gas. The silica catalyst was characterized by Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results of temperature-programmed desorption of ammonia (NH₃-TPD) and textural properties indicated that the synergistic effect between strong acidity and a suitable pore diameter of the silica catalyst may be responsible for its high activity. In addition, the catalyst was recyclable and showed excellent stability during the recycle catalytic runs.     

新疆部分城市可吸入颗粒物的浓度及粒径分布

采用TH-β10大气颗粒物浓度监测仪,从2011年4-5月在乌鲁木齐、奎屯、阿克苏、库尔勒、喀什、和田市环境监测站采集大气可吸入颗粒物PM2.5、PM5和PM10样品,分析了不同采样点大气颗粒物的质量浓度变化范围及与TSP的相应比值。结果表明,不论是PM2.5、PM5还是PM10,阿克苏市可吸入颗粒物的质量浓度变化幅度较大,其次是库尔勒市,其余采样点在采样期间的浓度变化幅度不大,并且库尔勒、喀什、奎屯、阿克苏四个城市PM5/TSP和PM2.5/TSP的比例大,除喀什、阿克苏的PM10/TSP的比例接近于1之外,其余可吸入颗粒物的浓度均小于TSP;采用显微镜观测成像技术结合血球计数板方法,利用粒径分布函数分析对六个城市的PM10和5个城市的PM2.5颗粒物在不同粒径的分布进行了分析。结果表明,对于PM10而言,阿克苏在dp<0.5的粒径范围内分布函数高达79%、喀什在dp=0.5~0.6μm之间为44%、和田则在dp=1.2~2.2μm出现20%的最大粒径分布函数。就PM2.5而言,库尔勒在dp<0.5、dp=0.5~0.6、0.6~1.2μm区间内的分布函数均为最大值,其值分为79%、50%、50%,可以说明在采样期间,库尔勒市区的颗粒物在粒径小于1.2μm出现的几率更大些,即颗粒物以积聚模态为主。